Tail sites, such as the vast number of video surveillance sites required as part of a Safe City project, urgently require fast, low-cost and high-bandwidth transmission solutions. To address this issue, Huawei presents its unlicensed point-to-multipoint (PtMP) microwave RTN510. The RTN510 features large bandwidth, strong anti-interference, environmental adaptation, simple O&M, and enhanced Ethernet, making a highly competent wireless transmission solution for projects with a large number of tail sites. The RTN510 can also provide a point-to-point (PtP) solution to achieve long-distance transmission after service aggregation.
Table 1 shows the quick spec. Huawei OptiX RTN510 provides 2 platforms: AP and RT II.
Platforms | AP | RT II |
Frequency range | 5 GHz: 4910 MHz to 5970 MHz | 5 GHz: 4910 MHz to 5970 MHz |
Channel spacing | 10 | 20 | 40 | 80 MHz | 10 | 20 | 40 | 80 MHz |
Modulation schemes | MCS0 (BPSK) to MCS9 (256QAM) | MCS0 (BPSK) to MCS9 (256QAM) |
RF functions | GPS synchronization, dynamic frequency selection (DFS), AM | GPS synchronization, dynamic frequency selection (DFS), AM |
Antenna gain | Typical: 17 dBi (PtMP), 22 dBi (PTP) Max: 18 dBi (PtMP), 23 dBi (PTP) | Typical: 16 dBi Max: 17 dBi |
Throughput | Up to 750 Mbps | Up to 250 Mbps |
Figure 1 shows the Huawei OptiX RTN510 Application Scenarios.
Huawei OptiX RTN510 provides these features:
(1) Ultra-large Bandwidth to Backhaul Multiple Services
· Ultra-large bandwidth: 750Mbps per AP, 250 Mbps per RT
· Con‑gurable uplink/downlink bandwidth ratio to suit various scenarios
(2) Strong Anti-interference to Ensure Smooth Deployment in Complex Wireless Environments
TDMA accurately controls timeslots to ensure that services are sent or received on individual timeslots, preventing conicts when multiple terminals send or receive data simultaneously on one frequency. With TDMA, a reliable connection is sustained between multiple RTs and one AP.
(3) Enhanced Environmental Adaptation to Endure Harsh Environments
· IP67 dustproof and waterproof
· 10 kV lightning protection
·–40ºC to +60ºC working temperature
(4) Simple O&M Improves Site Deployment Efficiency
· RT: plug and play
· AP: simple configuration
· Dying gasp function to locate a power failure quickly
· Mobile phone-based management
(5) Enhanced Ethernet to Meet Diverse Service Requirements
· E-Line/E-LAN/QinQ to build enterprise private lines
· Multi-level QoS + Adaptive modulation (AM) to provide flexible throughput
· Ethernet OAM to provide fast link diagnosis
Huawei OptiX RTN510 Specification | ||
Platforms | AP | RT II |
RF Performance | ||
Frequency range | 5 GHz: 4910 MHz to 5970 MHz | 5 GHz: 4910 MHz to 5970 MHz |
Channel spacing | 10 | 20 | 40 | 80 MHz | 10 | 20 | 40 | 80 MHz |
Modulation schemes | MCS0 (BPSK) to MCS9 (256QAM) | MCS0 (BPSK) to MCS9 (256QAM) |
RF functions | GPS synchronization, dynamic frequency selection (DFS), AM | GPS synchronization, dynamic frequency selection (DFS), AM |
Antenna gain | Typical: 17 dBi (PtMP), 22 dBi (PTP) Max: 18 dBi (PtMP), 23 dBi (PTP) | Typical: 16 dBi Max: 17 dBi |
Throughput | Up to 750 Mbps | Up to 250 Mbps |
System Performance | ||
Ports | 1 x GE (o), 1 x GE (e), 1 x GE (P&E) | 1 x GE (e), 1 x GE (P&E) |
Dimensions (H x W x D) | 204 mm x 204 mm x 65 mm | 240 mm x 213 mm x 61.5 mm |
Power consumption | 26 W (typical value) | 8 W (typical value) |
Power supply | AC/DC/PoE++ | AC/DC/PoE/PoE+ |
Lightning protection | The device's built-in surge protection design complies with IEC/EN 61000-4-5 and provides the capability to withstand at most 10 kV surges. | |
Dying gasp | Supported | |
Ethernet Performance | ||
Service type | E-Line, E-LAN | |
VLAN | IEEE 802.1q, IEEE 802.1p | |
QinQ | Supported | - |
QoS | · Service classification by DSCP/CoS · SP, SP+WRR, WRR · Port shaping · 8-class QoS | · Service classification by DSCP/CoS · SP, WRR · Port shaping · Multi-level QoS |
Ethernet OAM | 802.1ag, 802.3ah | 802.1ag |
Network Management | ||
NMS | Webserver, mobile phone-based management, eSight, NCE | |
Environment | ||
Protection class | IP67 | |
Operation temperature | –40ºC to +60ºC | |
Corrosion resistance of salt mist | Complies with the IEC 60068-2-11 standard (4 weeks of salt mist corrosion test) and suitable for seaside scenarios | |
Security | ||
Encryption | AES 256-bit | |
RT access control | MAC address-based whitelist | |
Authentication | RADIUS | |
