Model | Huawei OptiX RTN 380AX (P&E+DC option) | |
Microwave Type | IP microwave over Native Ethernet/PWE3 Ethernet | IP microwave over Native Ethernet/PWE3 Ethernet |
Frequency Band | 71–76/81–86 GHz | 71–76/81–86 GHz |
Capacity | • Maximum air-interface bandwidth: 10 Gbps • Maximum air-interface throughput: 10 Gbps • Switching capacity: 60 Gbps | • Maximum air-interface bandwidth: 10 Gbps • Maximum air-interface throughput: 10 Gbps • Switching capacity: 60 Gbps |
Port Type | Auxiliary port: USB port, RSSI port, NMS port, XPIC port Service port: Two 10GE optical ports, two fixed GE electrical ports (one of which can be used as a power over Ethernet (P&E) port) | Auxiliary port: USB port, RSSI port, NMS port, XPIC port Service port: • 1 P&E port • 2 SFP ports or 1 SFP port + 1 DSFP port |
The RTN 380AX is a full-outdoor microwave transmission device operating at 71–76 or 81–86 GHz frequency bands (E-band). The RTN 380AX is applicable to mobile communications networks or dedicated networks. It features large capacity, low intersite interference, and rich spectrum resources. It provides large-capacity microwave backhaul or aggregation links and can be used as a supplement to metro optical networks.
Table 1 shows the quick spec.
Model | Huawei OptiX RTN 380AX (P&E+DC option) |
Microwave Type | IP microwave over Native Ethernet/PWE3 Ethernet |
Frequency Band | 71–76/81–86 GHz |
Channel Spacing | 62.5 MHz, 125 MHz, 250 MHz, 500 MHz, 750 MHz, 1000 MHz, 1500MHz, 2000 MHz |
Modulation Scheme | BPSK, QPSK, 8PSK, 16QAM, 32QAM, 64QAM, 128QAM, 256QAM, 512QAM, 1024QAM |
Capacity | • Maximum air-interface bandwidth: 10 Gbps • Maximum air-interface throughput: 10 Gbps • Switching capacity: 60 Gbps |
Figure 1 shows the Huawei OptiX RTN 380AX Application Scenarios.
Huawei OptiX RTN 380AX provides these features:
(1) Ultra-High Bandwidth and High Spectral Efficiency
• Large capacity: provides microwave backhaul or aggregation links with 10 GE airinterface capacity. When XPIC is configured, link capacity per carrier can be increased to 20 Gbps, providing large-capacity microwave links for aggregation sites.
• 10GE ports: provides 10GE SFP optical ports and supports 10GE to site.
• Large channel bandwidth: provides 62.5 MHz, 125 MHz, 250 MHz, 500 MHz, 750MHz, 1000 MHz, 1500 MHz and 2000 MHz channel bandwidth.
• High modulation mode: provides a modulation scheme of up to 1024QAM.
• Super Dual Band: works as a slave device to bond with the RTN 900 to provide the Super Dual Band solution, or works as a master device to bond with the RTN310/320/380AX/905 1E/905 2E/third-party devices to provide the Super Dual Band solution. Through this solution, 10 Gbps microwave links with a maximum transmission distance of 10 km can be provided. In addition, through the Super Dual Band Relay solution, the transmission distance of E-band links can be extended further.
• AMAC: supports adaptive modulation and adaptive channel bandwidth (AMAC) to ensure the transmission of high-priority services.
(2) Easy Deployment & Maintenance
• Features a small size, light weight, zero footprint installation, fast deployment, and easy maintenance.
• Supports connection to NEs at a site through WLAN, implementing contactless maintenance.
• Supports mobile commissioning and configuration during site deployment, making operations convenient.
• Supports use of the NCE to implement E2E management, such as service deployment and real-time performance monitoring
Table 2 shows the comparison
Huawei OptiX RTN 380AX (P&E+DC option) Specification | |
Microwave Type | IP microwave over Native Ethernet/PWE3 Ethernet |
Frequency Band | 71–76/81–86 GHz |
Channel Spacing | 62.5 MHz, 125 MHz, 250 MHz, 500 MHz, 750 MHz, 1000 MHz, 1500MHz, 2000 MHz |
Modulation Scheme | BPSK, QPSK, 8PSK, 16QAM, 32QAM, 64QAM, 128QAM, 256QAM, 512QAM, 1024QAM |
Capacity | • Maximum air-interface bandwidth: 10 Gbps • Maximum air-interface throughput: 10 Gbps • Switching capacity: 60 Gbps |
RF configuration | Supports 1+0, 2+0, 1+1 HSB, CCDP, and multi-direction configuration |
Port Type | Auxiliary port: USB port, RSSI port, NMS port, XPIC port Service port: • 1 P&E port • 2 SFP ports or 1 SFP port + 1 DSFP port |
Service Type | • Native Ethernet services: E-Line, E-LAN • PW-based Ethernet services: E-Line, E-Aggr, E-LAN (VPLS) |
NMS | NCE, Web LCT, SNMP, built-in web-based NMS |
ETH OAM | IEEE 802.1ag, IEEE 802.3 ah, ITU-T Y.1731 |
Key Features | AMAC, ATPC, ERPS, PLA, QoS/HQoS, Bandwidth Notification, TWAMP/TWAMP Light, Anti-theft, Super Dual Band |
Clock Features | • Supported clock sources: microwave link clock, synchronous Ethernet clock • IEEE 1588v2 time synchronization. • ITU-T G.8275.1 time synchronization |
Power Supply Mode | P&E, generally used in conjunction with the RTN PI |
Antenna | • Dish antenna: 0.2 m, 0.3 m, 0.6 m • Panel antenna: 0.3 m x 0.3 m • Wide-beam antenna: 0.3 m x 0.077 m |
Dimensions | 285 mm x 265 mm x 73 mm |
Typical Power Consumption | 49W |
Environment | • Temperature: –33ºC to +55ºC • Humidity: 5% to 100% • Protection class: IP66 |
.
