Huawei OptiX OSN 1800 V Specification | ||
Dimensions (mm) | 221 x 442 x 224 (H x W x D) (excluding mounting ears) | |
Number of service board slots | • DC chassis: 15 • AC chassis: 12 | |
Optical-layer cross-connect capability | 1-degree to 9-degree ROADM | |
Device capacity | OTN | OTN capacity: 700 Gbit/s |
Packet | Packet capacity: 700 Gbit/s | |
TDM | 280 Gbit/s higher-order capacity, 40 Gbit/s lower-order capacity | |
Maximum number of wavelengths | DWDM | 80 |
CWDM | 8 | |
Maximum rate per channel | 200 Gbit/s | |
Supported service type | SDH service (STM-1/4/16/64), PDH service (E1/T1/E3/T3/E4), OTN service (OTU1/2/2e/4), Ethernet service (FE/GE/10GE/40GE/100GE), PCM service, CPRI service, OBSAI service, SAN service, video, and others | |
PCM interface | FXS/FXO, 2/4 line audio+E&M, G.703 64 kbit/s codirectional,V.35/V.24(synchronous/asynchronous RS232)/X.21,RS449(RS423A/RS422A)/RS530/RS530A/RS485/Dry Contact | |
Network application | Pure packet networking, pure OTN networking, pure TDM networking, MS-OTN networking (OTN+packet+TDM),hybrid networking (packet+TDM), OTN+packet networking, and OTN+TDM networking | |
Redundancy and protection | Network-level protection (OTN) | Client 1+1 protection, intra-board 1+1 protection, ODUk SNCP, optical line protection, tributary SNCP, and LPT |
Network-level protection (packet) | Tunnel APS, PW APS/FPS, MC-PW APS, MC-LAG, LPT, LAG, ERPS, MRPS, LMSP, and packet SNCP | |
Network-level protection (TDM) | • SDH protection: SNCP, linear MSP, ring MSP, TPS, E1 SNCP, 64K SNCP, and hitless protection switching • EoS protection: LAG, DLAG, LCAS, LPT, STP/RSTP • PCM protection: E1 SNCP, 64K SNCP, and hitless protection switching | |
Equipment-level protection | • Backup of cross-connect, system control, and clock units • Power supply backup • Fan backup | |
Easy O&M | OD and FD systems | |
Synchronization | • Physical-layer clock (OTN&packet&SDH) • IEEE 1588v2 (OTN&packet) • ITU-T G.8275.1/G.8273.2 (OTN&packet) | |
ASON | OTN network: electrical-layer ASON (only for Z series cross-connections) | |
Power supply | • DC power input: standard operating voltage: –48 V DC/–60 V DC • AC power input: standard operating voltage: 110 V AC/220 V AC | |
